1000 Series Smoke Control & Balancing

The Advanced Air Universal range of control dampers is designed to balance and/or control airflow through ducts, walls, and floors and may also be used to restrict the spread of smoke through a building. The range incorporates features required by specifiers, contractors, and fire authorities and embodies the combined experience of Nailor Industries Inc. (Canada and United States of America) and Advanced Air (UK) Limited, in the design, manufacture, sales, and service of dampers.

The Universal range is robustly constructed in all galvanised steel, with options of stainless steel blades or stainless steel blades and casing (430 Grade). There are models suitable for low, medium, and high-pressure applications, with a variety of sealing options.

Dampers are supplied with flanged, spigotted, wall or sleeve mounting, and either manual or motorised (electric or pneumatic) control is available, as required.

The standard blade format is the aerodynamically designed ribbed blade (1000 Series), with an airfoil blade option (1100 Series).

Whatever your application, Advanced Air’s Sales Office would be pleased to advise on the most suitable model from the Universal range.

Features

Galvanised steel construction, with stainless steel options
Opposed or parallel blade pattern
Unsealed, semi-sealed, or fully sealed option
Flanged, spigotted, sleeve or wall mounting
Manual or motorised (electric or pneumatic)
Airfoil blade option-1100 Series
Hand locking quadrant
Electrical Micro-switch
Standard Unit is supplied without side seals, sills or blade seals.
Pneumatic Actuation is also available

Tech Specs

Blades
Width 136mm standard
Centres 125mm
Material 1.6mm Galvanised Mild Steel – Standard
1.6mm Grade 430 Stainless Steel – Optional
Opposed Blades – Standard
Parallel Blades – Optional

Frame Flange Width 50mm – Standard
25mm, 30mm, 35mm and 40mm – Optional
50mm/25mm Wall Flange Optional

Frame Depth 110mm – Standard (Blades will protrude in the fully open position)
160mm and 200mm – Optional (Blades within frame on 200mm depths)

Material 1.6mm Galvanised – Standard
1.6mm Grade 430 Stainless Steel – Optional

Corners Corner Plates “Button Locked” to frame for strength & rigidity.
Seals Options Unsealed – Standard
Semi Sealed – Fitted with Stainless Steel Side Jamb Seals
Fully Sealed – Fitted with blade and side seals (Silicone seal only available on parallel blades dampers)

Linkage Side Linkage – External, Zinc electroplated mild steel enclosed with the frame, out of airstream, fixed for 90 degree operation – Standard
Jackshaft for induct mounting of actuator – Optional

Bearings 12.7mm dia Oil Filled Sintered Bronze suitable for use up to 200°C – Standard
12.7mm dia Stainless Steel suitable for use up to 650°C – Optional

Axles Zinc Electroplated Mild Steel

Side Jamb Cambered 430 Stainless Steel

Blade Seals PVC suitable for use up to 80°C
Silicone suitable for use up to 175°C (only available on parallel blade dampers)

Handle Zinc Electroplated Mild Steel Hand Locking Quadrant – Standard
Tamper Proof Moulded Handle with Position Indicator – Optional.

Bare Shaft 150mm x 12.7mm dia Drive Shaft – Right Hand as standard

Temperature Suitable for use from -45°C up to 80°C

Environment These units are not suitable for installation with a corrosive or hostile environment or an area of high humidity.

Casing (Ducting) Classes A & B DW144

Leakage
Performance Maximum Duct Velocity 15 m/s
Maximum Operating Pressure 1500 pa standard.
Electric Control Advanced Air are able to supply factory fitted actuators. A range of drive open/drive closed, modulating and spring return actuators can be supplied. Please contact Customer Services for further details

Dimensions

Minimum 100mm wide x 100mm high
Maximum Single Section 1200mm wide x 1800mm high
Multi-section – units can be interlinked to drive from one control mode up to 2000mm wide dependent on height and torque requirements.
Available in 1mm increments from 100mm high.